ZoomAir v2.50 Client
Installation Instructions
for Windows 2000
Note: Following the steps below will
allow any Windows 2000 computer to act as a ZoomAir Client
configured for either AdHoc or Infrastructure mode.
Before you begin: Double-click on the Windows
Explorer icon on your desktop, then select Tools
| Folder Options. Click the View tab, and select Show
Hidden Files. Then follow the steps below.
- Copy the downloaded "ndcapdrv.sys" driver
file into both the \winnt\system32 folder and the
\winnt\system32\drivers folder.
- Copy the downloaded "NetZoom.inf" file
into the \winnt\inf folder.
- Plug in your ZoomAir Card. When you are asked where the "ndcapdrv.sys" file
is, point to the \winnt\system32 folder.
- Next go to Hardware | Device Manager. Under Network
Adapters, highlight the ZoomAir Card and select Properties.
Select Resources and uncheck the Use Automatic
Configuration box.
- Restart your computer. You can then configure the ZoomAir
card's SSID, AdHoc/Infrastructure modes, etc., under the
dialog box selections Hardware | Device Manager | Properties
| Advanced.
|
